Harvestman – Piston Honda MK ][ Statement


“When updating the firmware on the Piston Honda mk. II, the 3-digit display will usually show a set of randomly illuminated segments as the operation proceeds. This is due to some processor pins being shared between the programming port and the home-grown display driver circuit I used. However, at the end of a successful firmware upload, the same thing always happens: the display briefly shows the number “666” before going black. I had absolutely nothing to do with this, it’s just the way the hardware behaves.

The third digit is driven from a completely different data line that isn’t anywhere near the programmer pins.” – Scott Jaeger of The Harvestman

Wow. It's Quiet Here...

Be the first to start the conversation!

Leave a Reply:

Gravatar Image